The fork-mounted bike rack provides stable transportation for most types of bicycles, even thick-framed mountain bikes. This aluminum rack is easy to install and includes a security lock. Simply remove the front wheel and attach to the fork mount. Also available separately is a wheel holder that mounts to the roof of the vehicle as well. Two bikes can be mounted on the roof at the same time. For bikes with or without disc brakes.

For bikes with or without disc brakes. For vehicles with Square Profile cross bars only. Not for T track mount.

Fork-mounted wheel holder for the bicycle's front wheel.
Note: Will require 8624353 T-Track Adapter for wing oval profile bars

Needed for Mounting of the Fork-Mounted Wheel Holder.

This aluminum bike carrier allows you to easily mount a bike without removing the front wheel.

Required for mounting of Bike Lift Carrier onto Wing Profile Cross Bars.

Note: Bike Lift Carrier Shown, this accessory is only the Assembly Kit.

This bike carrier makes it extremely easy to mount and unmount a bike onto your vehicle. With the help of a gas strut, this system easily raises and lowers your bike so you can mount it to the roof of your vehicle. Two bike-lift carriers can be mounted on top of your vehicle.
Note: Additional Mounting kit and Assembly kits are required to complete the installation (sold separately).

Required for mounting of Bike Lift Carrier onto Wing Profile Cross Bars.
Note: Bike Lift Carrier Shown, this accessory is only the Mounting Kit.

Add a unique look to your XC90 with a design element on the front bumper which reinforces the exclusive XC profile. Bumper bars are painted in silver metallic to match the other exterior components in the front section.

NOTE: Drilling into bumper required and unique tools (rivet tool and hexogonal sockets ) to install. Dealer installation is highly recommended. Adhesion Primers are required to prep the bumper and body of the vehicle for optimal adhesion (sold separately).

Add a unique look to your XC90 with a design element on the front bumper which reinforces the exclusive XC profile. Bumper bars are painted two tone painted silverstone/anthracite to compliment the other exterior components in the front section. This item is also available in primed ready to paint.

NOTE: Drilling into bumper required and unique tools (rivet tool and hexogonal sockets ) to install. Dealer installation is highly recommended.

Necessary for optimal adhesion for the Bumper Bar to the body.

Necessary for optimal adhesion for body the to the Bumper Bar.

The perfect carrier for transporting a canoe or kayak on the roof of your vehicle. The angle of the holders can be adjusted easily by hand to suit a number of different types of hulls.

Easily transports luggage, camping gear, golf clubs or anything else that clutters the car. The Volvo roof box provides safe storage while protecting customers belongings from the elements.

Dual-Side opening allowing for easy access to cargo from either side of the car
Easy opening and closing with Volvo central locking. "One key system"
Oversized capacity provides 17 cubic feet of storage
Holds between 6-8 pairs of skis, boots and poles
Constructed of tough impact resistant UV protected ABS plastic
Smooth, aerodynamic design for minimal wind noise
Easily attaches to Load carriers/Cross bars with New Quick Snap hardware for easy installation and removal.
Quick Grip mounting system which securely mounts the boxes to most load carriers in seconds.
"One key system" can be installed

NOTE: Additional Wing Profile Adapter is required when installing on Wing Profile Cross Bars.

This rooftop cargo box is designed with durable, lightweight plastic, and is perfect for transporting luggage, skis, golf clubs, etc. Dual-force struts allow for easy opening and closing. Opens from one side only. Grey top, black bottom. Can transport goods up to 110 lbs. distributed evenly.
NOTE: Additional Wing Profile Adapter (8624356) is required when installing on Wing Profile Cross Bars. Volume: 17 cu. ft. Weight: 41 lbs. Dimensions: 92.5 x 16.6 x 28.2 in.

Crossbars not only add to the appearance of the vehicle but provide the basis for a great roof-mounted load-carrying system. Volvo offers two styles of crossbars for the XC90: the wing profile aluminum crossbars, which have a sleek silver appeal, and the standard solid-square black crossbars.

These silver crossbars look great on the car without any load. These bars follow the shape of the roof and the aerodynamically shaped wing profile reduces wind noise. The upright bike carrier and the sliding ski carrier are just two of the great accessories that work with these bars.

Replacement plastic lock to secure the end cap. This is a service/replacement part for OEM Cross Bars. Priced individually. 4 required, one for each end of each cross bar.

Note: 4 of these are already included with the Wing Profile Cross Bars. This is being offered as replacement parts if lost or damaged.

This interior bike holder allows you to transport up to two bicycles inside the car. The bicycles are mounted standing by removing the front wheel and securing the fork in the carrier. The front wheel also has its own carrier to prevent it from moving around in the cargo area. Fits all bikes with a maximum of 28.7 in. (73 cm.) between the front wheel hub and the highest point of the handlebars.

Rails, designed to suit the car's roof line. Aerodynamic design with elegant attachment to the roof molding and very easy to fit thanks to the pre-installed fixing points in the roof.

Roof ribs help protect against scratches on the roof as well as add to the appearance of the vehicle. The ribs consist of rubber and easily mount to the roof of the vehicle. There are a total of seven longitudinal ribs along the roof. The maximum load capacity for these ribs is 80 lbs.

This roof-mounted luggage carrier is constructed of aluminum and plastic-covered steel tubes. Simply add load straps and you can transport items conveniently on the roof of your vehicle.

Requires mounting kit (8624355) Wing Profile / T-Slot roof rack systems.

Protects the surface of the board and provides fast, simple mounting and dismounting. Includes mast holder and load straps. Sailboard Carrier cannot be fitted to load carrier with T-Track.

This ski holder comes in three different sizes, accommodating three pairs, four pairs or six pairs of skis. Requires adapter for Wing Profile Cross Bars (8624350)

This ski holder comes in three different sizes, accommodating three pairs, four pairs or six pairs of skis. Requires adapter for Wing Profile Cross Bars (8624350)

This ski holder comes in three different sizes, accommodating three pairs, four pairs or six pairs of skis. Additional mounting kit may be required for use with wing profile crossbars.

The angled ski holder transports up to two pairs of skis. The benefit of this type of ski holder is it prevents damage to the roof of your car if your skis have large bindings. Also shown is the snowboard holder, which accommodates up to two snowboards.

The angled ski holder transports up to two pairs of skis. The benefit of this type of ski holder is it prevents damage to the roof of your car if your skis have large bindings. Also shown is the snowboard holder, which accommodates up to two snowboards.

This lockable sliding ski rack holds either six pairs of skis or four snowboards. In one easy move the ski holder slides out to the side of the vehicle to allow for convenient loading and unloading. An attractive aerodynamic design, made in aluminum, and black rubber, gives your car a custom, sporty look.
Requirement: Sliding Ski Rack Mounting Kit if using with Wing Profile Crossbars

Required for wing profile cross bars and sliding ski rack combination.

The snowboard holder accommodates up to two snowboards. The benefit of this type of ski holder is it prevents damage to the roof of your car. Its a perfect accessory to use with the load bars.

The snowboard holder accommodates up to two snowboards. The benefit of this type of ski holder is it prevents damage to the roof of your car. Its a perfect accessory to use with the load bars.

A complete kit that includes load-retaining straps, resilient rubber moldings, strong vinyl pads and a mast holder. The mast holder has load-restraining straps that hold the mast securely in place. Works in conjunction with the standard roof rails and the accessory crossbars.

Required to install Mountaineer Cargo Box on the wing profile cross bars.